Product Name : RS232 to RS485 Converter
Product No : LCS-9485
Read More
Product Description
  • Port-powered, no external power required
  • 300 to 115.2K Baud operation (auto-sensing & self-adjusting)
  • Extends RS485/RS422's distance to up to 4000ft (1.2km)
  • Plug and play
  • No software drivers or flow control is required
RS-232 to RS-485 Converter, 2/4-Wire RS485,RS422, Multi-Drop, Termination Resistor,LCS-9485

RS-232 to RS-485 Converter, LCS-9485, converts RS-232 to 2-Wire RS485/ 4-Wire RS485/ RS422, supports multi-drop RS485/RS422 networks, and extends RS485/RS422's distance to up to 4000ft (1.2km). LEDs show Data communication (Tx/Rx) and Power status. 
RS-232 to RS-485 Converter-interface

RS-232 to RS-485 Converter, LCS-9485 draws power from the RS-232 device and requires no external power supply. There are 4 DIP Switches designed for operation mode configurations.  RS485, RS422, Eco, and Termination Resistor (RT) Settings are available for Point-to-Point or Multi-Drop connection.
RS-232 to RS-485 Converter-Dip

RS-232 to RS-485 Converter-connection

  • Port-powered, no external power required
  • Converts RS232 to 4-wire RS485 or RS422 and vice versa
  • Supports multi-drop RS422 networks
  • 300 to 115.2K Baud operation (auto-sensing & self-adjusting)
  • Extends RS485/RS422's distance to up to 4000ft (1.2km)
  • Supports point-to-point multidrop configuration and full or half-duplex operation
  • Plug and play (hot-pluggable, data format auto-sensing & self-adjusting)
  • No software drivers or flow control is required
  • ALL-IN-ONE rugged terminal block designed for different requirements
  • 15kV static protection and circuit protection

Model Name

LCS-9485

  LEDs

  TXD, RXD, PWR

  Communication Type

  Asynchronous serial comminication

  Transmission Speed

  115.2Kbps (Max.)

  Distance

  1.2Km (Max.)
  (Refer to the chart-Transmission Distansmission Speed)

  Connector

  RS-232 side: DB9-F
  RS-422/ RS-485 side: 6-Way Terminal Block

  RS-422 / RS-485
  Termination resister
  Rs-485 Echo-mode

  Controlled by Dip Switch

  Internal Connection

  DCD, DSR, CTS pins are selectively
  connected to GND

  Circuit Protection

  15,000 volt-surge protector included

  Power

  Without Power Adapter
  S-232 TXD, RTS, DTR signal

  With Power Adapter
  Voltage: DC 5V

  Polarity
  Independent

  Dimensions (H x W x D)(mm)

  19.5 x 38.6 x 61

  Weight (g)

  33

 

Connecting Diagram of RS232 To RS485 Serial Converter | LCS-9485

Cookies

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.
Yes, I agree.
Compare()

The products have beenadded, you can select up to 5 products for comparison.

Compare