Ready to run right out of the box, this Kit comes with everything you need - a switch and complete cable sets, just hook them up and go. By allowing one console to manage all your computers, the MyHopper eliminates the expense for extra consoles, the spaces for extra peripherals and the time hopping around for accessing different computers.

	Console Connection

Turn your computers off. Connect a PS/2 keyboard to the mini-DIN-6 port marked with “Keyboard” and a PS/2 mouse to the mini-DIN-6 port marked with “Mouse”. Then connect your VGA monitor cable directly to the HD-DB-15 port as shown below for 2-port MyHopper.

The multi-sync monitor must be capable of synchronizing with the computer's video signal. If you are uncertain about the monitor type, please consult the monitor user's manual.

The MyHopper consumes negligible power and is designed to run reliably without an external power adapter.

	Computers Connection

MyHopper comes with complete cable sets facilitating computer connection. One side of the cable has an HDB-15 connector and the other side has three connectors (one HDB-15 and two mini-DIN6s). The PC 1 ~ PC 2 marks on the MyHopper are for computer connection as shown below.

NOTE : If your computer uses an AT style keyboard, you will need an "AT-to-PS/2 keyboard adapter" at the computer keyboard port.

	Features

	Unique loose-free cables included preventing keyboard or mouse connector from getting loose
	Supports PS/2 keyboard and mouse
	Keyboard and mouse emulation for error-free PC boot up
	Keyboard and mouse are hot pluggable at any time without turning either MyHopper or PCs off
	Space-saving design - all cables are connected to the rear
	Auto scan automatically selects computers sequentially
	Supports M/S IntelliMouse (Pro), Explorer, Optical
	Hot-key and push button allow easy computer access
	Keyboard states automatically saved and restored when switching computers
	Operating system independent, transparent to all applications
	High VGA resolution 1920x1440
	DDC2B compatible
	Power-free operation - the MyHopper draws power from the attached PCs

Specification	KMH2C
Console port number	1
Computer portnumber	2
Audio support	No
Port selection push button	1
Hot plug-and-play	Yes
Hot-key control	Yes
VGA	1920 x 1440, DDC2B
Computer connector	HDB15 x 2
Console connector Keyboard Mouse Monitor Speaker/Mic	PS/2 PS/2 HDB15
	No
Audio support	No
Automatic scan interval	3, 8, 15, 30 seconds
KVM Cable set	1.8m x 2
Audio Cable set	No
H x W x D (mm)	20 x 70 x 155
Power-free operation	Yes