Built-in signal converter and keyboard/mouse emulation, the SNCP12 allows trouble-free computer boot-up and flawless switching between computers of different platforms. Computer can be selected by the front panel pushbutton or hot-key command.

Automatic keyboard/mouse Conversion
The advanced signal conversion technology enables you to connect one Sun and one PS/2 PC to the switch, and control both computers by one Sun keyboard, mouse and monitor. The KVM switch automatically changes its keyboard and mouse signals for different computer.

	Features

Support both Sun and PS/2 computer
Support PS/2 computer with 2- or 3- button mouse driver
Automatic signal conversion between platforms
Keyboard states automatically saved and restored when switching computers.
Keyboard and mouse can be hot plugged at any time
True plug and play configuration
High VGA resolution: 1920 x 1440
Power-free operation

	Console Connection

Keyboard/mouse	Connect a Sun keyboard to the rear side of the switch. As usual, connect the Sun mouse to the Sun keyboard.
Note : Do not connect a PS/2 keyboard or mouse to this port, because the connector does not fit.

VGA monitor

Connect a VGA monitor to the VGA port as shown in figure 1a. If the VGA monitor uses 13W3 connector, a HDB15-to-13W3 adapter is needed(male-female) as shown in figure 1b.

	Sun Computer Connection

Use a straight-through (1-1, 2-2,…8-8) miniDIN8 male-to-male cable to connect to a Sun computer's keyboard/mouse port and the M/K-1 port.

Use a HDB15 male-to-male cable to connect to the Sun computer's VGA O/P to the VGA port as shown in figure 2a. If the Sun’s VGA O/P uses 13W3 connector, a 13W3-to-HDB15 adapter is needed. (male-female) as shown in figure 2b.

	PS/2 Computer Connection

	Use a PS/2 male-to-male cable to connect from the K-2 port to a PC's keyboard port
	Use a PS/2 male-to-male cable to connect from the M-2 port to the PC's mouse port
	Use a HDB15 female-to-male cable to connect from the VGA port on port 2 to the PC's VGA port as shown in figure 3

Specification	SNCP12
Computer port number	2
Front Panel Pushbutton	1
Front panel indicator	Green x 2 (computer power-on) Red x 2(selected)
Sun keyboard supported	Type 4, 5, 6
Hot plug-and-play	Yes
Hot-key command	Yes
Auto scan interval	3, 8, 15, 30 seconds
Cable length (Max)	30M for PS/2 computer 15M for Sun computer
VGA resolution	1920 x 1440
Console keyboard/mouse connector VGA connector	Mini-DIN8 x 1 HDB-15
Sun keyboard/mouse connector VGA connector	Mini-DIN8 x 1 VGA x 1
PS/2 computer keyboard connector mouse connector VGA	mini-DIN6 x 1 mini-DIN6 x 1 HDB15
Weight	410g
H x W x D (mm) (in.) size	40 x 124 x 70 1.6 x 4.9 x 2.7 Micro
Power supply	DC 9V/500mA