4K HDMI Extender Over CAT.x with IR, Serial, LAN, 100M ( PoH )
EVBMN-M210
EVBMN-M210, HDMI Extender with Ethernet Switch, provides HDMI, bi-directional IR, Serial, and Ethernet Switch extension capability through a single Cat. 5e or Cat. 6 cable up to 100 meters at 1080p (or 70 meters at the resolution of 4K) in a point-to-point configuration, and supports HDCP and power saving function. The built-in Auto EDID Configuration ensures the optimized video output.
HDMI Extender with Ethernet Switch & Dual-IR, EVBMN-M210, The bi-directional IR extension function supports full frequency range from 38KHz up to 56KHz. Furthermore, the distance between the emitter head and the IR port on the unit may be extended to provide users a flexible and easy way in IR control system installation (maximum 3 meters IR cable can be purchased separately).
Full-duplex data communication between Tx and Rx via CAT.x cable connection is the cost effective, hardware-based solution, providing remote access and control for all RS-232 protocol devices without any setup or configuration. RS-232 serial extension is suitable to be applied in digital signage, industrial or commercial office, smart classroom, and Smart Home System.
The LAN extra function of Rextron HDBaseT HDMI Extender, 100BaseT Ethernet Pass-Thru, simultaneously distributes Video and Ethernet streams between the connecting system of Transmitter and Receiver unit via a single CAT.x cable connection.
Power over HDBaseT ( PoH ) enables the transfer of DC power over a single Ethernet cable to a distance of up to 70/100 meters. Thus, single power supply at either end of the extender units, the PoH function is especially useful in the condition where there’s no available power socket at certain side. The PoH standard is based on the IEEE 802.3at standard and includes definitions of the power source equipment ( PSE ) and the powered device ( PD ) describing the detection and protection mechanisms to ensure safe and reliable power delivery.
Unique Design Settings for Remote Output Configuration
- Long Reach: Reduce the resolution to extend the transmission distance up to 150m@1080P
- Normal: Factory default 1080p & 4K resolution
- Auto Power Saving: System automatic power saving function under 4K resolution (Max.)
- Transmits Uncompressed HDMI Video to A Remote Display via a CAT.x Cable Up to 100 Meters ( 328 feet ) ( 150M, Long-Reach Enabled )
- HDMI Video Supports Most Popular Resolutions Up to 4K@30Hz ( 4:4:4 )
- HDBaseT Uncompressed Video Extension Ensures Crystal Clear Image and Low Latency
- HDR10 Support for Best Visual Experience
- HDCP 1.4 Compliance Ensures Uninterrupted HD and UHD Video Playback
- Support HDMI CEC
- Bidirectional IR Extension Facilitates Remote Control of Sources or TVs
- Serial Extension Allows for Extensive Control Applications
- LAN Extension Allows for Local and Remote LAN Sharing
- PoH ( Power over HDBaseT ) Allows The Receiver to Be Powered by The Transmitter ( DC 48V )
- Plug-and-Play without Software or Driver
|
Model Name |
EVBMN-M210 ( PoH ) |
|
|
EVBMN-210L (Tx-PSE) |
EVBMN-210R (Rx-PD) |
|
|
MAX.Resolution |
3840x2160@30Hz ( 4:4:4 ) |
|
|
Video Interface |
HDMI 1.4 x 1 ( In ) |
HDMI 1.4 x 1 ( Out ) |
|
Bidirectional IR Extension |
3.5mm IR Jack x 1 ( In ) |
3.5mm IR Jack x 1 ( Out ) |
|
Serial Extension |
DB9 x 1 ( DCE ) |
DB9 x 1 ( DTE ) |
|
LAN Extension |
RJ45 x 3 ( 10/100Mbps ) |
RJ45 x 3 ( 10/100Mbps ) |
|
Slide Switch |
Power Saving Mode / Long Reach Mode x 1 |
|
|
LED Indicator |
Status x 1 |
Status x 1 |
|
HDCP Compliance |
HDCP 1.4 |
|
|
HDBaseT Interface |
RJ45 x 1 ( CAT.5e/6/7 ) |
|
|
Extension Range |
MAX. 70 Meters@4K |
|
|
Power Supply |
DC 48V |
( Optional DC 12V ) |
|
Operation Environment |
0~40°C, Humidity<80% |
|
|
Storage Temperature |
-20~60°C |
|
|
Enclosure |
Metal |
|
|
H x W x D (mm) |
38 x 140 x 85 |
38 x 140 x 85 |
|
Weight (g) |
500 |
500 |
