- Home
- Products
- Other products
- LCS-9485
RS232 to RS485 Converter
LCS-9485
RS-232 to RS-485 Converter, 2/4-Wire RS485,RS422, Multi-Drop, Termination Resistor,LCS-9485
RS-232 to RS-485 Converter, LCS-9485, converts RS-232 to 2-Wire RS485/ 4-Wire RS485/ RS422, supports multi-drop RS485/RS422 networks, and extends RS485/RS422's distance to up to 4000ft (1.2km). LEDs show Data communication (Tx/Rx) and Power status.

RS-232 to RS-485 Converter, LCS-9485 draws power from the RS-232 device and requires no external power supply. There are 4 DIP Switches designed for operation mode configurations. RS485, RS422, Eco, and Termination Resistor (RT) Settings are available for Point-to-Point or Multi-Drop connection.


RS-232 to RS-485 Converter, LCS-9485, converts RS-232 to 2-Wire RS485/ 4-Wire RS485/ RS422, supports multi-drop RS485/RS422 networks, and extends RS485/RS422's distance to up to 4000ft (1.2km). LEDs show Data communication (Tx/Rx) and Power status.

RS-232 to RS-485 Converter, LCS-9485 draws power from the RS-232 device and requires no external power supply. There are 4 DIP Switches designed for operation mode configurations. RS485, RS422, Eco, and Termination Resistor (RT) Settings are available for Point-to-Point or Multi-Drop connection.


- Port-powered, no external power required
- Converts RS232 to 4-wire RS485 or RS422 and vice versa
- Supports multi-drop RS422 networks
- 300 to 115.2K Baud operation (auto-sensing & self-adjusting)
- Extends RS485/RS422's distance to up to 4000ft (1.2km)
- Supports point-to-point multidrop configuration and full or half-duplex operation
- Plug and play (hot-pluggable, data format auto-sensing & self-adjusting)
- No software drivers or flow control is required
- ALL-IN-ONE rugged terminal block designed for different requirements
- 15kV static protection and circuit protection
Model Name |
LCS-9485 |
LEDs |
TXD, RXD, PWR |
Communication Type |
Asynchronous serial comminication |
Transmission Speed |
115.2Kbps (Max.) |
Distance |
1.2Km (Max.) |
Connector |
RS-232 side: DB9-F |
RS-422 / RS-485 |
Controlled by Dip Switch |
Internal Connection |
DCD, DSR, CTS pins are selectively |
Circuit Protection |
15,000 volt-surge protector included |
Power |
Without Power Adapter |
Dimensions (H x W x D)(mm) |
19.5 x 38.6 x 61 |
Weight (g) |
33 |
