DVI KVM Extender over IP with Serial, USB, IR (Receiver)
NVXDU-31R
DVI KVM over IP Receiver Unit, FHD, HDCP 1.4, EDID Migration, Audio, USB 2.0, Serial, Bi-directional IR Extension, Video Wall Setting, and Serial/ Web GUI Control, NVXDU-31R
DVI KVM over IP Receiver Unit, NVXDU-31R, allows you to extend DVI/ Audio/ USB/ IR/ Serial signals using a Gigabit Local Area Network (LAN). Matrix switching extension over IP provides independent Video, USB2.0, IR, RS-232 routing. 4 USB ports (USB 2.0x2 + USB HIDx2) on the front and the rear side of the receiver unit (Rx) are suitable for both long-term and temporary USB peripherals connection, 16 channels (ID) on the DIP rotary switch on both Tx and Rx unit are available for pairing, and up to 4 pairings of FHD VIDEO transmission can be activated simultaneously over Giga LAN. EDID Copy and EDID migration sending EDID file from Rx to Tx ensure uninterrupted video playback and fix the black-screening issues. Video Wall functions are available via Serial Port or Web GUI settings.
The bi-directional IR extension function supports full frequency IR signal range from 38KHz up to 56KHz. Furthermore, the distance between the emitter head and the IR port on the unit may be extended to provide users a flexible and easy way in IR control system installation (maximum 3 meters IR cable can be purchased separately).
Full-duplex data communication between Tx and Rx via Ethernet connection is the cost effective, hardware-based solution, providing remote access and control for all RS-232 protocol devices without any setup or configuration. RS-232 serial extension is suitable to be applied in digital signage, industrial or commercial office, smart classroom, and smart Home system.
Under one-to-one transmission (Unicasting), bidirectional audio extension function is activated and can independently transmit 2-way audio signal from the Transmitter unit to the Receiver unit, and vice versa.
Video Wall setting:
DVI KVM over IP Receiver Unit, NVXDU-31R, Support 2×2, 3×3, 4×4…9×9 Screen Array configurations and Video Wall setup can be easily achieved via serial port or Web GUI settings.
- Extend FHD 1080P [ DVI + USB 2.0 + Serial + IR ] Signal over IP
- 16 Channels Selections for Pairing
- Up to 4 Pairs Simultaneous Transmission over IGMP HUB (Fiber or Cat.5e)
- Each Pairing Can Broadcast up to 1000 Locations (TVs / Projectors)
- Using LAN for Low Latency Network and Well-grouping Management
- Auto EDID Configuration
- Support 2ch. Audio and Microphone
- Support Serial and GUI Control
- HDCP Compliant and Blu-ray Ready
- Up to 1080p & Most Popular Screen Resolutions
- Optional VESA Mounting Bracket Supported
- PoE Function Supported, No Need Additional Power Supply for The Extender Unit (Available for PoE Model )
- Interoperability Shared Among Fiber / Cat.5e Models & HDMI/DVI Models
- Extension Up to 150M Linked Directly via Cat.5e (or Up to 70KM via Fiber)
- 4K HDMI & DP Models Also Available (No Local Console)
- Local Console at Sender Side Ensure Function with Single-Port Sources NVXDU
|
Model Name |
NVXDU-31R ( Receiver ) |
|
Input Interface |
3.5mm Jack x 1 ( In ) |
|
Output Interface |
DVI x 1 |
|
USB Extension |
USB-A 2.0 x 2 |
|
IR Extension |
Bi-Directional |
|
Serial Extension |
Bi-Directional (RJ 12) |
|
Serial Control |
RJ 12 x 1 |
|
LEDs |
x 2 |
|
Video Resolution (Max.) |
Full HD (1920 x 1080) @ 60 Hz |
|
Maximum Distance |
Point-to-Point: 150 meters |
|
LAN Type |
Giga LAN |
|
System Expandability (Max.) |
16 Channels, Up to 1000 Stations |
|
Control Method |
Web (LAN), Serial |
|
Operation Environment |
0~40°C, Humidity<80% |
|
Storage Temperature |
-20~60°C |
|
Power Supply |
DC 12V |
|
Weight (g) |
680 |
|
H x W x D (mm) |
28 x 130 x 117 |
