Product Name : 4K HDMI Extender Over CAT.x With IR, Serial, LAN, 70M ( PoC )
Product No : EVBMN-M107
Read More
Product Description
  • Transmits Uncompressed HDMI Video to A Remote Display via a CAT.x Cable Up to 70 Meters ( 230 feet )
  • HDMI Video Supports Most Popular Resolutions Up to 4K@30Hz ( 4:4:4 )
  • HDR10 Support for Best Visual Experience
  • HDCP 1.4 Compliance Ensures Uninterrupted HD and UHD Video Playback
  • Support HDMI CEC
  • HDBaseT Uncompressed Video Extension Ensures Crystal Clear Image and Low Latency
  • Bidirectional IR Extension Facilitates Remote Control of Sources or TVs
  • Serial Extension Allows for Extensive Control Applications
  • LAN Extension Allows for Local and Remote LAN Sharing
  • PoC ( Power over Cable ) Allows The Power Transmission from Either Tx-to-Rx or Rx-to-Tx
  • Plug-and-Play without Software or Driver
  • LAN Extension
  • 4K 60 420
  • 4K 30
  • Bidirectional IR Extension
  • RS 232 Extension
  • HDCP 1.4

4K 70M HDMI Extender Unit with Ethernet Switch, Bi-directional IR/ Serial extension, HDBaseT 1.0, PoC, EVBMN-M107
(EVBMN-M107=EVBMN-107L+EVBMN-107R)


EVBMN-M107, HDMI Extender Unit with Ethernet Switch, provides HDMI, bi-directional IR, Serial, and Ethernet Switch extension capability through a single Cat. 5e or Cat. 6 cable up to 70 meters at 1080p (or 35 meters at the resolution of 4K) in a point-to-point configuration, and supports HDCP and power saving function. The built-in Auto EDID Configuration ensures the optimized video output.

HDMI Extender Unit with Ethernet Switch, EVBMN-M107, The bi-directional IR extension function supports full frequency range from 38KHz up to 56KHz. Furthermore, the distance between the emitter head and the IR port on the unit may be extended to provide users a flexible and easy way in IR control system installation (maximum 3 meters IR cable can be purchased separately).

Full-duplex data communication between Tx and Rx via CAT.x cable connection is the cost effective, hardware-based solution, providing remote access and control for all RS-232 protocol devices without any setup or configuration. RS-232 serial extension is suitable to be applied in digital signage, industrial or commercial office, smart classroom, and Smart Home System

The LAN extra function of Rextron HDBaseT HDMI Extender, 100BaseT Ethernet Pass-Thru, simultaneously distributes Video and Ethernet streams between the connecting system of Transmitter and Receiver unit via a single CAT.x cable connection.
HDMI Extender Unit with Ethernet Switch-app

Power over HDBaseT ( PoC ) enables the transfer of DC power over a single Ethernet cable to a distance of up to 70/100 meters. Thus, single power supply at either end of the HDMI extender units, the PoC function is especially useful in the condition where there’s no available power socket at certain side.

  • Transmits Uncompressed HDMI Video to A Remote Display via a CAT.x Cable Up to 70 Meters ( 230 feet )
  • HDMI Video Supports Most Popular Resolutions Up to 4K@30Hz ( 4:4:4 )
  • HDR10 Support for Best Visual Experience
  • HDCP 1.4 Compliance Ensures Uninterrupted HD and UHD Video Playback
  • Support HDMI CEC
  • HDBaseT Uncompressed Video Extension Ensures Crystal Clear Image and Low Latency
  • Bidirectional IR Extension Facilitates Remote Control of Sources or TVs
  • Serial Extension Allows for Extensive Control Applications
  • LAN Extension Allows for Local and Remote LAN Sharing
  • PoC ( Power over Cable ) Allows The Power Transmission from Either Tx-to-Rx or Rx-to-Tx
  • Plug-and-Play without Software or Driver

Model Name

EVBMN-M107 ( PoC )

EVBMN-107L  (Transmitter)

EVBMN-107R (Receiver)

  MAX.Resolution

3840x2160@30Hz ( 4:4:4 )
3840x2160@60Hz ( 4:2:0 )

  Video Interface

HDMI 1.4 x 1 ( In )

HDMI 1.4 x 1 ( Out )

  Bidirectional IR Extension

3.5mm IR Jack x 1 ( In )
3.5mm IR Jack x 1 ( Out )

3.5mm IR Jack x 1 ( Out )
3.5mm IR Jack x 1 ( In )

  Serial Extension

DB9 x 1 ( DCE )

DB9 x 1 ( DTE )

  LAN Extension

RJ45 x 3 ( 10/100Mbps )

RJ45 x 3 ( 10/100Mbps )

  LED Indicator

Status x 1
LAN x 3

Status x 1
LAN x 3

  HDCP Compliance

HDCP 1.4

  HDBaseT Interface

RJ45 x 1 ( CAT.5e/6/7 )
( STP cabling is recommended for environments with high EMI or RFI. For the best
performance results, please refer to the manual for further details. )

  Extension Range

MAX. 35 Meters@4K
MAX. 70 Meters@1080P

  Power Supply

DC 12V ( PoC )

DC 12V ( PoC )

  Operation Environment

0~40°C, Humidity<80%

  Storage Temperature

-20~60°C

  Enclosure

Metal

  H x W x D (mm)

38 x 140 x 85

38 x 140 x 85

  Weight (g)

500

500

100M HDMI Extender with Ethernet Switch

Cookies

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies.
Yes, I agree.
Compare()

The products have beenadded, you can select up to 5 products for comparison.

Compare